上海发黑磷化加工处理厂
专注于金属件防锈酸洗处理:主营发黑磷化、锌磷化、锰系磷化、磷酸盐防锈处理
全国统一热线/微信
18521388869
江浙沪统一热线/微信
18217503338

发黑磷化表面处理丨上海发黑厂上海磷化公司欢迎您上海磷化加工地址

发黑磷化表面处理丨上海发黑厂上海磷化公司欢迎您上海磷化加工地址德国BRECO皮带BRECO同步带BRECOFLEX官网Continental同步带中国大陆欢迎您Synchroflex传动带在不利操作条件下,只要未超过凸齿抗剪强度、张力线强度和挠性的允许值,Brecoflex同步带的宽度均正确。我们的产品目录中对经过可靠证明和通过台架试验和实践所获结果确认的负荷极限进行了说明。仅传输速度较高的驱动装置需要安全系数。

    上海发黑厂上海磷化BRECO同步带BRECOFLEX官网工程师了解并正确估计驱动期间出现的不利负荷类型很重要。在齿轮啮合传动下,即使采用传动构件同步带也会出现短时的过载问题。针对该问题的一些指导方法如下:马牌同步带官网

额定操作:

    针对额定负荷的操作条件设计同步带。额定负荷是指传动装置在正常条件下以额定速度传输扭矩或动力时的操作条件。

同步带制动:

    可能需要确定制动是否会通过同步带产生满负荷,是否超过额定操作或启动时所产生的瞬时负荷。在制动过程中,应考虑到可能出现的扭矩反转。

德国马牌皮带.jpg

The width of a timing belt is correct when the permissible values for tooth shear strength, tension cord strength and flexibility are not exceeded under unfavourable operating conditions. In our catalogue, load limits are stated which have been reliably proven and confirmed by bench tests and results obtained in practice. A safety factor is only required for drives with transmission into higher speed.

It is important, that the unfavourable load types occuring in the drive are known resp. correctly estimated by the engineer. With a positive fit transmission, even shortperiod overloads act via the timing belt being the drive member. Some instructions to this issue:

Rated operationDesign timing belts for the operating condition of the rated load. The rated load is the operating condition atwhich the drive should transmit the torque or the power at rated speeds under normal conditions 上海磷化加工地址





上海磷化发黑表面处理厂
QQ:189441910

联系地址:上海市奉贤区/金山区
联系邮箱:shpaka@126.com

联系电话:19821119899/18217503338
会员登录
登录
其他帐号登录:
回到顶部